RENEWABLE ENERGY

Renewable Energy

What is new and renewable energy?

New and renewable energy refers to energy that is used by converting existing fossil fuels or by converting them into renewable energy, including sunlight, water, precipitation, and biofluid. Renewable energies include solar power, sun power, bio fuel energy, wind power, and water power, and new energies include fuel cells and hydrogen energy. Although there are disadvantages that the initial investment cost is high, interest in new and renewable energy is increasing because of the exhaustion of fossil energy and the importance of environmental problems.

Solar power

It uses solar power generation system to collect light energy and turn it into electricity. It does not make pollution problem, it does not require fuel and it is noiseless. It is easy to install and can be used for a long time.

Inverter for solar power generation

It is the power conversion device that supplies the direct current produced by the solar panel as a system or stores it in the battery. It is the core of the solar power plant because it monitors and controls the solar power plant. It performs maximum power point tracking (MPPT) to produce solar energy as efficiently as possible even with temperature and irradiation, and protects solar power generation facilities by stopping operation when there is a problem with the system through the single operation prevention function.

※ Classification of solar power generation system :
Hybrid system - Combined with generation method by other energy sources such as wind power and diesel power generation
Grid-connected system - Used for housing, buildings, large-scale power generation system in the area where KEPCO line is coming

Wind energy

It is the energy used to convert the kinetic energy of a natural wind into rotational energy and finally produce electricity. Since wind is caused by uneven heating of the ground, irregularity of the earth's surface, rotation of the earth's magnetic field, etc., wind power is a form of solar energy and can produce electricity using the power generation system. In other words, wind energy can be used indefinitely and is clean energy that does not emit pollutants. The amount of energy obtained from the wind is determined by the diameter of the blades and the speed of the wind. The larger the diameter of the blades and the higher the wind speed, the greater the amount of electricity produced possible.

Inverter for wind power generation

In wind power generation, there is a problem that power supply is unstable because the amount of wind blowing is not constant every time. The role of the PCS for wind power generation is to convert the unstable power input from the wind power generator into stable and constant power. It also controls the speed of the rotating blades so that they can operate at the optimal efficiency, which is not too fast or slow depending on the wind speed.

Fuel Cell

Fuel cells are a new energy source that produces electricity and heat energy through the chemical reaction of hydrogen and oxygen in the air. It is a clean energy source that does not emit harmful substances. The city gas is converted into hydrogen through a reformer and supplied to the stack together with oxygen in the air to produce electricity and thermal energy.

Inverter for fuel cell

It is a unidirectional power conversion device that boosts low voltage (20 ~ 100V) DC produced by fuel cell according to the required voltage or converts it to AC. If the efficiency of the PCS is low, the economical efficiency of the fuel cell itself is deteriorated. Therefore, the PCS technology plays a very important role in the system. In Korea, researches on stacks and reformers are mainly carried out. However, in advanced countries such as the United States, it is important to study the low cost and high efficiency of power conversion devices, which are key technologies, in order to promote commercialization of fuel cell systems.

SOLAR PCS : PLAVIX-Series

arrow_drop_down capacity
  • PLAVIX-500KH1
    PLAVIX-500KH1
  • PLAVIX-1MH1
    PLAVIX-1MH1
  • PLAVIX-2.2MH254
    PLAVIX-2.2MH254
  • PLAVIX-2.2MH265
    PLAVIX-2.2MH265
  • All-In-One 4.4MW Solution
    All-In-One 4.4MW Solution

FUEL PCS : PLAFEX-Series

arrow_drop_down capacity

WIND PCS : PLAWIX-Series

arrow_drop_down capacity

What is Fuel Cell System?

HD HYUNDAI PLASPO supplies building & power generation fuel cell systems.

Mandatory New and Renewable Energy Insttlsallation System (2020)

Public institutions that are newly constructed, expanded or refurbished shall be required to supply part of their energy use to new and renewable energy facilities.(over 1000㎡ gross floor area)

Years 2017 2018 2019 '20 ~ '21 '22 ~ '23 '24 ~ '25 '26 ~ '27 '28 ~ '29 2030 ~
Mandatory
Rate
(%)
21 24 27 30 32 34 36 38 40

Drag from side to side!

Green Building Design Criteria / Evaluation of Environmental Impact in Seoul (2020)

If a building with a floor area of 3000㎡ or more is requested for construction permit or repurposing, a certain amount of the expected energy use must be supplied to new and renewable energy facilities.

Example of calculation

Area: Seoul / Floor Area: 3,500㎡/ Purpose: Commercial/Business Facilities Estimated Energy Usage = 3,500㎡ X 374.47 kkWh/m3 . yr X 1=1,310,645 kWh/yr Output of new and renewable energy= 1,310,645 kWh/yr X 21% = 275,235 kWh/yr

Types of New Renewable energy Unit energy output
(kWh/kW · yr)
Source Correction Factor Installation scale (kW) Installation area(㎡)
Solar Energy Fixed Type 1,358 1.56 130 849
Geothermal Energy Vertical Closed Type 864 1.09 292 655
Fuel Cell PEMFC 7.415 2.84 13 13

Drag from side to side!

Estimated energy usage = building floor area * unit energy usage * regional coefficient New Renewable Energy Production = Estimated Energy Consumption * Required New Renewable Energy Installation Ratio Scale = renewable energy output / unit energy output /Source Correction Factor

Photovoltaic Power Business

Total solution and service for photovoltaic power business and PV-connected ESS Business.

Solution & Service

Financial Solution

Loan execution by only land and power generation Facilities.
Loan execution for Power plant in REX stock market transaction.
Loan execution in batches after splitting or completion according to construction schedule.

Equipment Solution

Photovoltaic PCS, ESS PCS are available including solar modules with proven quality and performance.
Providing the high efficiency and competitive price through the proved and operating site data.
PLAVIX-series / PLABEX- series / Battery

Integrated O&M Service

Efficient operational monitoring with constant monitoring of integrated control systems.
Long-term analysis of O&M service data ensures performance and uptime.

1st PV Power Plant (Gimpo)

2nd PV Power Plant (Paju)